A-A-421A
2.1.4 Lid or Float closure. The lid or float closure shall be double wall (airspace) watertight construction and shall fit closely over the neck to form a neat closure. The lid, if hinged, shall be operable by thumb pressure on a lid extension and shall be securely attached to the outer shell and lid. The hinge pin shall be made of corrosion-resisting steel or brass. When equipped with a float closure, there shall also be a removable outer lid to control the opening of the float closure.
2.2 Marking. The pitchers shall be marked with the manufacturer’s name, trade name, or trademark of such known character that the source of manufacture may be readily determined.
2.3 Workmanship. The pitcher shall be clean, free from foreign matter and defects which may affect appearance or serviceability. The pitcher shall be free from mold marks, rough or sharp edges, scratches or deformities.
2.4 Commercial item. The use of the term “commercial item description” in this document does not imply that any item or items offered are not required to conform with all requirements specified herein.
3. REGULATORY REQUIREMENTS
3.1 FDA requirements. The material used in the pitcher shall meet the applicable requirements of 21 CFR 121, Federal Food, Drug, and Cosmetic Act.
3.2 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4. QUALITY ASSURANCE PROVISIONS
4.1 Contractor certification. The contractor shall certify that the item meets the salient characteristics and the requirements of this commercial item description, and except for any government unique requirements specified, conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial marketplace, or is the same product that has been successfully been delivered to the government on a previous contract or purchase order. The government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business